Non-invasive methods of monitoring Fe3O4 magnetic nanoparticle toxicity in human liver HepaRG cells using impedance biosensing and Coherent anti-Stokes Raman spectroscopic (CARS) microscopy.

Functionalized nanoparticles have been developed for use in nanomedicines for treating life threatening diseases including various cancers. To ensure safe use of these new nanoscale reagents, various assays for biocompatibility or cytotoxicity in vitro using cell lines often serve as preliminary assessments prior to in vivo animal testing. However, many of these assays were designed for soluble, colourless materials and may not be suitable for coloured, non-transparent nanoparticles. Moreover, cell lines are not always representative of mammalian organs in vivo. In this work, we use non-invasive impedance sensing methods with organotypic human liver HepaRG cells as a model to test the toxicity of PEG-Fe3O4 magnetic nanoparticles. We also use Coherent anti-Stokes Raman Spectroscopic (CARS) microscopy to monitor the formation of lipid droplets as a parameter to the adverse effect on the HepaRG cell model. The results were also compared with two commercial testing kits (PrestoBlue and ATP) for cytotoxicity. The results suggested that the HepaRG cell model can be a more realistic model than commercial cell lines while use of impedance monitoring of Fe3O4 nanoparticles circumventing the uncertainties due to colour assays. These methods can play important roles for scientists driving towards the 3Rs principle - Replacement, Reduction and Refinement.

Direct purification and immobilization of his-tagged enzymes using unmodified nickel ferrite NiFe2O4 magnetic nanoparticles.

Purification of valuable engineered proteins and enzymes can be laborious, costly, and generating large amount of chemical waste. Whilst enzyme immobilization can enhance recycling and reuse of enzymes, conventional methods for immobilizing engineered enzymes from purified samples are also inefficient with multiple-step protocols, regarding both the carrier preparation and enzyme binding. Nickel ferrite magnetic nanoparticles (NiFe2O4 MNPs) offer distinct advantages in both purification and immobilization of enzymes. In this work, we demonstrate the preparation of NiFe2O4 MNPs via a one-step solvothermal synthesis and their use in direct enzyme binding from cell lysates. These NiFe2O4 MNPs have showed an average diameter of 8.9 ± 1.7 nm from TEM analysis and a magnetization at saturation (Ms) value of 53.0 emu g-1 from SQUID measurement. The nickel binding sites of the MNP surface allow direct binding of three his-tagged enzymes, D-phenylglycine aminotransferase (D-PhgAT), Halomonas elongata ω-transaminase (HeωT), and glucose dehydrogenase from Bacillus subtilis (BsGDH). It was found that the enzymatic activities of all immobilized samples directly prepared from cell lysates were comparable to those prepared from the conventional immobilization method using purified enzymes. Remarkably, D-PhgAT supported on NiFe2O4 MNPs also showed similar activity to the purified free enzyme. By comparing on both carrier preparation and enzyme immobilization protocols, use of NiFe2O4 MNPs for direct enzyme immobilization from cell lysate can significantly reduce the number of steps, time, and use of chemicals. Therefore, NiFe2O4 MNPs can offer considerable advantages for use in both enzyme immobilization and protein purification in pharmaceutical and other chemical industries.

Gold-iron oxide (Au/Fe3O4) magnetic nanoparticles as the nanoplatform for binding of bioactive molecules through self-assembly.

Nanomedicine plays a crucial role in the development of next-generation therapies. The use of nanoparticles as drug delivery platforms has become a major area of research in nanotechnology. To be effective, these nanoparticles must interact with desired drug molecules and release them at targeted sites. The design of these "nanoplatforms" typically includes a functional core, an organic coating with functional groups for drug binding, and the drugs or bioactive molecules themselves. However, by exploiting the coordination chemistry between organic molecules and transition metal centers, the self-assembly of drugs onto the nanoplatform surfaces can bypass the need for an organic coating, simplifying the materials synthesis process. In this perspective, we use gold-iron oxide nanoplatforms as examples and outline the prospects and challenges of using self-assembly to prepare drug-nanoparticle constructs. Through a case study on the binding of insulin on Au-dotted Fe3O4 nanoparticles, we demonstrate how a self-assembly system can be developed. This method can also be adapted to other combinations of transition metals, with the potential for scaling up. Furthermore, the self-assembly method can also be considered as a greener alternative to traditional methods, reducing the use of chemicals and solvents. In light of the current climate of environmental awareness, this shift towards sustainability in the pharmaceutical industry would be welcomed.

Plasma degradation of contaminated PPE: an energy-efficient method to treat contaminated plastic waste.

The use of PPE has drastically increased because of the SARS-CoV-2 (COVID-19) pandemic as disposable surgical face masks made from non-biodegradable polypropylene (PP) polymers have generated a significant amount of waste. In this work, a low-power plasma method has been used to degrade surgical masks. Several analytical techniques (gravimetric analysis, scanning electron microscopy (SEM), attenuated total reflection-infra-red spectroscopy (ATR-IR), x-ray photoelectron spectroscopy (XPS), thermogravimetric analysis/differential scanning calorimetry (TGA/DSC) and wide-angle x-ray scattering (WAXS)) were used to evaluate the effects of plasma irradiation on mask samples. After 4 h of irradiation, an overall mass loss of 63 ± 8%, through oxidation followed by fragmentation, was observed on the non-woven 3-ply surgical mask, which is 20 times faster than degrading a bulk PP sample. Individual components of the mask also showed different degradation rates. Air plasma clearly represents an energy-efficient tool for treating contaminated PPE in an environmentally friendly approach.

Investigation into the Use of Microfluidics in the Manufacture of Metallic Gold-Coated Iron Oxide Hybrid Nanoparticles.

Hybrid iron oxide-gold nanoparticles are of increasing interest for applications in nanomedicine, photonics, energy storage, etc. However, they are often difficult to synthesise without experience or 'know-how'. Additionally, standard protocols do not allow for scale up, and this is significantly hindering their future potential. In this study, we seek to determine whether microfluidics could be used as a new manufacturing process to reliably produce hybrid nanoparticles with the line of sight to their continuous manufacture and scaleup. Using a Precision Nano NanoAssemblr Benchtop® system, we were able to perform the intermediate coating steps required in order to construct hybrid nanoparticles around 60 nm in size with similar chemical and physical properties to those synthesised in the laboratory using standard processes, with Fe/Au ratios of 1:0.6 (standard) and 1:0.7 (microfluidics), indicating that the process was suitable for their manufacture with optimisation required in order to configure a continuous manufacturing plant.

Antimicrobial Properties of Gallium(III)- and Iron(III)-Loaded Polysaccharides Affecting the Growth of Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, In Vitro.

Antimicrobial resistance (AMR) has become a global concern as many bacterial species have developed resistance to commonly prescribed antibiotics, making them ineffective to treatments. One type of antibiotics, gallium(III) compounds, stands out as possible candidates due to their unique "Trojan horse" mechanism to tackle bacterial growth, by substituting iron(III) in the metabolic cycles of bacteria. In this study, we tested three polysaccharides (carboxymethyl cellulose (CMC), alginate, and pectin) as the binding and delivery agent for gallium on three bacteria (Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus) with a potential bioresponsive delivery mode. Two types of analysis on bacterial growth (minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC)) were carried out while iron(III)-loaded polysaccharide samples were also tested for comparison. The results suggested that gallium showed an improved inhibitory activity on bacterial growth, in particular gallium(III)-loaded carboxymethyl cellulose (Ga-CMC) sample showing an inhibiting effect on growth for all three tested bacteria. At the MIC for all three bacteria, Ga-CMC showed no cytotoxicity effect on human dermal neonatal fibroblasts (HDNF). Therefore, these bioresponsive gallium(III) polysaccharide compounds show significant potential to be developed as the next-generation antibacterial agents with controlled release capability.

Localization of Coated Iron Oxide (Fe3O4) Nanoparticles on Tomato Seeds and Their Effects on Growth.

Food demand due to the growing global population has been stretching the agriculture sector to the limit. This demands the cultivation of plants in shrinking land areas which makes the search for highly effective systems for plant nutrition and pest control important. In this context, the application of nanoparticles (NPs) in agriculture can have a transformative effect on food production techniques as it can enable the delivery of bioactive agents (including growth factors, pesticides, and fungicides) directly to plants. Herein, we report the application of unfunctionalized as well as amine-functionalized and polycaprolactone-coated Fe3O4 NPs to seed treatment in tomato (Solanum lycopersicum). The study reveals that the treatment has no side effects on plant germination and development. Furthermore, the translocation of NPs in seeds and seedlings posttreatment depends on the surface functionalization of the NPs. X-ray fluorescence spectroscopy analysis of seedlings suggested that around 66% of unfunctionalized Fe3O4 NPs were translocated in the cotyledons, while only 50% of functionalized NPs (both amine and polycaprolactone) were translocated. Our results demonstrate that all particles were taken up by the seeds, thus suggesting that the functionalized NPs can act as a versatile platform for delivering of active compounds, such as fungicides and growth factor agents.

Increasing magnetite contents of polymeric magnetic particles dramatically improves labeling of neural stem cell transplant populations.

Safe and efficient delivery of therapeutic cells to sites of injury/disease in the central nervous system is a key goal for the translation of clinical cell transplantation therapies. Recently, 'magnetic cell localization strategies' have emerged as a promising and safe approach for targeted delivery of magnetic particle (MP) labeled stem cells to pathology sites. For neuroregenerative applications, this approach is limited by the lack of available neurocompatible MPs, and low cell labeling achieved in neural stem/precursor populations. We demonstrate that high magnetite content, self-sedimenting polymeric MPs [unfunctionalized poly(lactic acid) coated, without a transfecting component] achieve efficient labeling (≥90%) of primary neural stem cells (NSCs)-a 'hard-to-label' transplant population of major clinical relevance. Our protocols showed high safety with respect to key stem cell regenerative parameters. Critically, labeled cells were effectively localized in an in vitro flow system by magnetic force highlighting the translational potential of the methods used.

Comprehensive study of DNA binding on iron (II,III) oxide nanoparticles with a positively charged polyamine three-dimensional coating.

Iron (II,III) oxide Fe3O4 nanoparticles (25 and 50 nm NPs) are grafted with amine groups through silanization in order to generate a positively charged coating for binding negatively charged species including DNA molecules. The spatial nature of the coating changes from a 2-D-functionalized surface (monoamines) through a layer of amine oligomers (diethylenetriamine or DETA, about 1 nm in length) to a 3-D layer of polyamine (polyethyleneimine or PEI, thickness ≥3.5 nm). These Fe3O4-PEI NPs were prepared by binding short-chain PEI polymers to the iodopropyl groups grafted on the NP surface. In this work, the surface charge density, or zeta potential, of the nanoparticles is found not to be the only factor influencing the DNA binding capacity, which also seems not to be affected by their buffering capacity profile in the range of pH 4-10. This study also allows the investigation of this 3-D effect on the surface of a nanoparticle as opposed to conventional 2-D amine functionalization. The flexibility of the PEI coating, which consists of only 1, 2, and 3° amines, on the nanoparticle surface has a significant influence on the overall DNA binding capacity and the binding efficiency (or N/P ratio). These polyamine-functionalized nanoparticles can be used in the purification of biomolecules and the delivery of drugs and large biomolecules.

Chemical grafting of a DNA intercalator probe onto functional iron oxide nanoparticles: a physicochemical study.

Spherical magnetite nanoparticles (MNPs, ∼ 24 nm in diameter) were sequentially functionalized with trimethoxysilylpropyldiethylenetriamine (TMSPDT) and a synthetic DNA intercalator, namely, 9-chloro-4H-pyrido[4,3,2-kl]acridin-4-one (PyAcr), in order to promote DNA interaction. The designed synthetic pathway allowed control of the chemical grafting efficiency to access MNPs either partially or fully functionalized with the intercalator moiety. The newly prepared nanomaterials were characterized by a range of physicochemical techniques: FTIR, TEM, PXRD, and TGA. The data were consistent with a full surface coverage by immobilized silylpropyldiethylenetriamine (SPDT) molecules, which corresponds to ∼22,300 SPDT molecules per MNP and a subsequent (4740-2940) PyAcr after the chemical grafting step (i.e., ∼ 2.4 PyAcr/nm(2)). A greater amount of PyAcr (30,600) was immobilized by the alternative strategy of binding a fully prefunctionalized shell to the MNPs with up to 16.1 PyAcr/nm(2). We found that the extent of PyAcr functionalization strongly affects the resulting properties and, particularly, the colloidal stability as well as the surface charge estimated by ζ-potential measurement. The intercalator grafting generates a negative charge contribution which counterbalances the positive charge of the single SPDT shell. The DNA binding capability was measured by titration assay and increases from 15 to 21.5 µg of DNA per mg of MNPs after PyAcr grafting (14-20% yield) but then drops to only ∼2 µg for the fully functionalized MNPs. This highlights that even if the size of the MNPs is obviously a determining factor to promote surface DNA interaction, it is not the only limiting parameter, as the mode of binding and the interfacial charge density are essential to improve loading capability.

Preparation and characterization of iron oxide-silica composite particles using mesoporous SBA-15 silica as template and their internalization into mesenchymal stem cell and human bone cell lines.

A new procedure for preparing iron oxide-silica nanocomposite particles using SBA-15 mesoporous silica as a template is described. These composite materials retained the 2-D hexagonal structure of the SBA-15 template. Transmission electron micrograms of the particles depicted the formation of iron oxide nanocrystals inside the mesochannels of SBA-15 silica framework. Powder x-ray diffraction showed that the iron oxide core of the composite particles consists of a mixture of maghemite (gamma-Fe(2)O(3)) and heamatite (alpha-Fe(2)O(3)), which is the predominant component. Superconducting quantum interference device (SQUID) magnetometry studies showed that these iron oxide-silica composite materials exhibit superparamagnetic properties. On increasing the iron oxide content, the composite particles exhibited a stronger response to magnetic fields but a less homogeneous core, with some large iron oxide particles which were thought to be formed outside the mesochannels of the SBA-15 template. Internalization of these particles into human cell lines (mesenchymal stem cells and human bone cells), which indicates their potential in medicine and biotechnology, is also discussed.

Preparation and characterization of polyethylenimine-coated Fe3O4-MCM-48 nanocomposite particles as a novel agent for magnet-assisted transfection.

A new type of magnetic nanoparticle was synthesized using mesoporous silica MCM-48 as a template. Magnetite (Fe(3)O(4)) nanocrystals were incorporated onto the MCM-48 silica structure by thermal decomposition of iron(III) acetylacetonate. The particle size of these Fe(3)O(4)-MCM-48 composite particles is around 300 nm with an iron oxide content of ca. 20% w/w. Measurements from SQUID magnetometry suggest that these nanoparticles possess superparamagnetic properties similar to those of Fe(3)O(4) nanoparticles. By coating positively charged polyethylenimine on to the surface, DNA can be bound onto the Fe(3)O(4)-MCM-48 nanoparticles. Transfection studies showed that these PEI-Fe(3)O(4)-MCM-48 particles were highly effective as a transfection reagent, and a 400% increase of transfection efficiency compared with the commercial products was recorded.